典型地铁站台射频天线电磁暴露安全评估

为有效评估典型地铁站台射频天线对乘客电磁暴露的安全性,设计地铁站台无线通信系统吸顶天线和乘客人体模型,利用基于有限元的电磁仿真软件,构建吸顶天线辐射下的地铁站台乘客候车电磁环境模型,研究候车乘客的公众电磁暴露问题。结果表明:天线分别工作在900和2 440 MHz时,人体组织的平均比吸收率最大值分别为4.441×10-7和1.165×10^-6W·kg^-1,电场强度最大值分别为0.139和0.148V·m^-1,平均比吸收率在人体组织内的衰减均大于电场强度的衰减;2 440MHz时的射频电磁能量在颅内的穿透能力小于900MHz时;所有计算值均低于国际非电离辐射委员会制定的公众电磁暴露限值,说明地铁站台射频天线对乘客的电磁暴露不会构成健康威胁。     

聚氨酯夹层板舱口盖振动特性研究

聚氨酯夹层板(SPS)因其出色的力学性能、减振降噪特性等在船舶建造领域得到了广泛应用。以船舶轻量化、高性能设计为目标,以64000DWT散货船钢制舱口盖为替代目标,采用聚氨酯夹层板设计新型舱口盖结构,基于有限元软件Ansys Workbench开展SPS舱口盖结构振动特性分析,研究其模态振型、谐响应和随机振动。通过与钢制舱口盖振动特性的对比研究,论证了聚氨酯夹层板在船舶减重和结构减振方面的优势与前景。研究结果表明:SPS舱口盖设计方案,在实现整体减重12%的情况下,使谐响应振幅降低75%;在1σ区域内,使随机振动的位移、应力响应分别降低了63.4%和76.1%。研究结果可以为船舶结构轻量化设计、舒适性改善等提供参考。     

基于交错并联的Ⅱ型五电平逆变器电路的仿真研究

研究了一种基于交错并联的Ⅱ型五电平逆变器电路。该拓扑是双BUCK电路的一种变形,可以视为双BUCK拓扑和交错并联技术结合的产物。这种拓扑减少了开关器件,降低了系统复杂度,而且提高了输出频率,大幅度减小了用于滤波的无源器件的体积。介绍了该拓扑存在的7种状态和4种模态。介绍了Ⅱ型五电平的单向仿真,详细阐述了其正弦脉宽调制.仿真结果符合之前的理论研究,说明该拓扑在大功率变换场合有其前景。     

Simplified buckling-and-contact-based expansion method for assessment of crashworthiness of double-hulled ship structure

Ship-to-ship collision events can have severe consequences such as loss of life and environmental degradation. For this reason, modern ship designs are required to incorporate a double-hulled structure to prevent inner-hull damage from such events. Using the experimental or numerical method to analyze the crashworthiness of double-hulled ship structures entails much effort, for which reason neither method is easy to adopt at the early design stage. In this paper, an existing simplified method called Ito's method is improved by a new buckling-and-contact-based expansion method. This method can be applied to double-hulled-structure or outer-hull-local-rupture failure mode. The perpendicular bow-to-side collision scenario is assumed for a conservative estimation of damage to a double-hulled structure. The method was verified in the present study by numerical ship collision simulations of several cases. The results for the buckling-and-contact-based expansion method and numerical simulation were similar for a blunt shape of striking body but different for a sharp shape.     

Experimental study of freak wave impacts on a tension-leg platform

This study investigates the freak wave impinging on a tension-leg platform through wave flume experiments. The freak waves are generated using the focused wave theory. By adjusting the wave focusing location, different incident wave scenarios at the structure location are produced. Simultaneous measurements of wave shape evolutions upon impingement, wave impact pressures on the platform deck, platform motions and tether forces are carried out for synchronized analyses of the wave kinematics/dynamics and structural responses. The variation of these parameters with the incident wave profile is studied. It is found that although applying less intensive local impact pressures as compared to the highly-breaking freak wave, the slightly-breaking or non-breaking freak wave imposes the same level of adverse effect on the platform's global stability in terms of motions and tether forces. In addition, the high-crest freak wave causes violent motions of the floating platform, which are likely to induce snap loads of large amplitude and high occurrence frequency in tethers. The published results would provide useful benchmarks for validating numerical and analytical models.     

与铁路同台驳接地铁站台排烟方案探讨

针对地铁、国铁同台驳接入铁路枢纽的地铁车站,地铁地面站台位于交通枢纽内部的特殊形式,站台层的排烟方案需根据建筑形式进行特殊考虑。对站台层的排烟方案进行对比分析,通过火灾烟气模拟,对烟气自然扩散、自然排烟和机械排烟3种排烟方案进行对比分析。烟气自然蔓延条件下,能见度无法保证人员安全疏散。由于建筑形式的特殊,无法满足自然排烟条件。为保证安全,设置了机械排烟系统。对与国铁站房结合的综合枢纽中地铁车站排烟方式,应将自然排烟的可行性纳入其初期建筑方案中优先考虑。     

基于ADAMS的舰载补给起重机摇摆仿真及减摇措施分析

舰载补给起重机吊运柱状箱体时,箱体会由于各种外界影响发生摇摆。针对舰载补给起重机起吊的柱状箱体在舰船摇荡、起重机启停、风载的影响下发生的摇摆进行了ADAMS动力学仿真,得到了这3种因素对柱状箱体摇摆的影响情况,以及柱状箱体在预设工况下的运动规律。改变钢丝绳数量和布置形式进行仿真,得到了不同钢丝绳数量和布置下柱状箱体的运动情况以及相对单根钢丝绳的减摇效果,为进行动基座起重机减摇、防摇研究提供了依据。     

分布式作战指挥模拟训练系统中语音通信仿真研究*

传统的分布式作战指挥模拟训练系统中存在通信模块可控性差、操作使用复杂等问题，为此设计和实现了新型的多功能语音通信仿真系统。提出了系统的总体结构，对系统中的语音服务器、语音客户端和通话器进行了设计，详细阐述了系统涉及的四项关键技术及其实现方案。实际应用的结果表明所设计和实现的多功能语音通信仿真系统能够满足部队指挥训练的要求。     

带缆水下机器人控制仿真模拟与水动力分析

本文以Fluent多重滑移网格技术对带缆水下机器人系统进行路径跟踪的仿真计算,将收放缆反馈控制与PID算法调节螺旋桨转速的双重控制策略应用于带缆水下机器人系统,并对带缆水下机器人系统升沉运动的控制误差、螺旋桨推力与转速之间的关系、缆绳系统的张力特性以及水下机器人的水动力响应做了分析。文中数值模拟结果表明,双重控制策略下,带缆水下机器人路径跟踪的控制运动较为精确,其升沉运动位移最大误差约为0.2 m;螺旋桨的转速与推力呈正相关性,转速越大,推力也越大;水下机器人沿预定轨迹运动过程中,缆绳系统张力呈现周期性震荡的变化规律,机器人主体受到的水动力荷载与多种因素相关。     

Simulation of Transfer Organization of Urban Public Transportation Hubs

Transfer organization of public transportation terminals has played a more important role in urban transportation management and planning. The micro-simulation software, VISSIM, is designed to model the pedestrian transfer in the Xizhimen Public Transportation Terminal (Beijing, China) in this paper. Four problems are found in the case study: severe disturbance between pedestrians and traffic flows, long transfer distances, bus waiting time and great traffic flow density. The paper proposes some measures for the solution to the problems, such as increasing the departure frequency of buses, building the crossing-street infrastructure for pedestrians, shortening transfer distances. The simulation result shows that the proposed methods in this paper are valuable in improving the efficiency of the transfer organizations of the Xizhimen Public Transportation Terminal (Beijing, China).